Fuel & Petrochemical analysers according to ASTM , ISO and other international standards.
Grabner Instruments, a subsidiary of AMETEK, Inc. is one of the most innovative companies world wide manufacturing automatic petroleum testing equipment. Grabner Instruments’ success is based on the development of highly innovative, fully automated, portable fast & easy to operate fuel and oil analyzers.
Highly versatile that features best-in-class precision and a pressure range of 0-2000 kpa
FTIR fuel analyzer for automatic measurement of gasoline, jet and diesel fuels.
Flash point as per ASTM D6450 and ASTM D7094 Continuously closed cup – Sample volume of 1-2 ml.
Distillation run takes just 15 minutes and requires as little as 6 mL of sample.
Flow-Properties of Lubrication Grease according to Kesternich (DIN 51805)
AD Systems specializes in the design, manufacturing of unique test equipment for the evaluation of physical properties and performances of fuels and lubricants. All of the products offered by AD Systems were developed in response to specific needs within the petroleum industry.
ASTM D3241, ASTM D1655, ASTM D7566 , IP 323 , DEFSTAN 91-091 , ISO 6249
ASTM D3241, ASTM D1655, ASTM D7566, ISO 6249, Def Stan 91-91
Referee Instrument. ASTM D1322, D1655, IP 598, Def Stan 91-91
Corrosion Properties of Mineral Oil & Pipeline Cargoes ASTM D665, NACE TM0172
NACE TM0172, ASTM D665, D7548, IP 135, ISO 7120, JIS K2510
ASTM D323, D4953, ISO 3007, IP 69.
Measurement of the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method , ASTM D7899
ASTM D7157, ISO PAS 23263, CIMAC guidelines
Phase Technology has an outstanding reputation as a leader in the cold flow properties testing industry due to the consistent introduction of new innovative products and continual improvement in the quality, design and capabilities of its offerings.
Stay compliant with IMO 2020 regulations
Four diesel fuel tests in one single unit, in less than 25 minutes
Measure freeze point, viscosity and density in jet fuel with Phases’s JFA-70Xi in less than 15 minutes
Phase Technology’s 70Xi analyzes pour, cloud and freeze point, all in one unit
Measure Wax Appearance Test (WAT) and Wax Disappearance Test (WDT) with the WAT-70Xi
TSHR BV is an innovative, young and dynamic company for the development, manufacturing, sales, service and distribution of Combustion Elemental Analysis solutions.
Vertical sample introduction and high temperature oxidation followed by UV-Fluorescence (TS-UVF) and chemiluminescence (TN-CLD) detection
Horizontal sample introduction and high temperature oxidation followed by UV-Fluorescence (TS-UVF) and chemiluminescence (TN-CLD) detection
Introduce safe, accurate and reliable your Gas and LPG samples – ASTM D3246, ASTM D6667, ASTM D7551
Omnitek B.V. has been on the market for 40 years and is known worldwide for its automatic kinematic viscometry systems covering a wide range of viscosity testing.
Full range automatic viscometry systems for lubricants and other petroleum products. ASTM D445, D446, D2270
Houillon viscosity reinvented with an optional autosampler , ASTM D7279, D2270
Fully automatic viscometer for highly viscous samples up to 120,000 mm²/s. ASTM D445/D446, ASTM D2170
AlyTech is a France-based company founded in 1999 and headquartered in Paris region.
It is a strong team of chemists, electronic and software engineers with long experience in gas systems, chromatography and elementary analysis. Alytech develops, manufacture and sell automated gas preparation systems under GasMix™ brand since 2007
Dynamic gas mixer to perform multi-point calibration, linearity checks, LOQ/LOD validation.
Complies to ISO 6145-7
Simple in operation and widely used for various applications that involve only 2 gases.
Complies to ISO 6145-7
Compact and intelligent instrument that assists in routine quality procedures in a lab, in a mobile lab or at a customer site. Complies to ISO 6145-7
Diluting – Blending up to 16 gases simultaneously! Complies to ISO 6145-7
Enhanced functionalities of GasMix™… in a 19″ rack. Complies to ISO 6145-7
Standalone vaporizer for safe and repeatable vaporization of liquefied petroleum gas (LPG) or other liquefied gas for sampling to GC, microGC, GC/MS or elemental Analyzer.
The system vaporizes a liquid into a gas stream generating a gas standard at multiple concentrations . Complies to ISO 6145-7
Multi-stage cascade dilution offers very wide range of concentrations from % to ppb levels. Complies to ISO 6145-7
Unique all-in-one calibration solution for laboratory, mobile labs or remote locations useM
Emcee Electronics Inc was founded in New Castle, Delaware in 1958. In 1959 Emcee developed an initial instrument, the Water Separometer, which has evolved into the current Micro-Separometer.
Emcee has since developed other instruments used to test for certain qualities in fuels, lubricants, solvents, paints, coatings, additives, and other fluids.
Model 1152 Digital Conductivity MeterWater Separation Characteristic, Free Water And Particulate Testing (ASTM Standard Test Methods D3948, D7224, D7261 & D4860)
ASTM Standard Test Method D 2624 included in Specifications D975, D1655, and D7566
ORBIS BV based in Netherlands, designs and manufacture instruments for physical properties testing. For tests that are typically carried out in the energy industry, according to ASTM and related methods.
Excellent performance in Automatic Distillation testing. ASTM D1078, ASTM D850, ASTM D86 , IP 195, ISO 3405
ASTM D6371, EN116, IP309, JIS K2288, EN16329
Choice Analytical, Inc. is a leading-edge analytical instrumentation company focused on cutting edge technology ,with state-of-the-art manufacturers supplying the most innovative instrumentation for developing unique products for automated color and haze testing.
ASTM D8148 Haze in Fuels. Color tests performed ASTM D1500, Saybolt D156, D6045, D1209, D5386, ISO 2049, IP 196.
QuantaRed Technologies founded in 2008 is a leading global provider for QCL – Quantum Cascade Laser Technology
Compact stand ‐ alone analyzer that comes in a modern, portable and rugged design. Complies with ASTM D8290
Quantify Oil in Water in down to 0.1 mg/L using eco-friendly, CFC-free solvents in compliance with ASTM D7678.
J.M. Canty based in USA , manufactures lighting, cameras, sight flow indicators, quick opening closures, glass to metal seals, vision-based process control, and particles sizing systems.
Particle Sizing. Particle Count , Water in Oil
Since 1992, Zeltex has offered the premier line of portable NIR analyzers for fuel, grain and food. Headquartered in Hagerstown, Maryland, Zeltex has supplied thousands of Customers with the tools needed to succeed in today’s competitive markets.
Highly accurate and reliable near – infrared spectroscopy for analysis of Octane and Cetane levels in gasoline , ethanol blended gasoline and diesel fuels
B/R Instrument has specialized in laboratory distillation equipment since 1966. Common uses of its distillation systems include solvent recycling, solvent purification, crude oil distillation, and many other applications of high efficiency fractional distillation.
The Automaxx 9100 performs ASTM D2892 D5236 crude oil distillation automatically.
Performs the ASTM D1160 vacuum distillation automatically.