Our Products

Fuel & Petrochemical analysers according to ASTM , ISO and other international standards. 

Grabner Instruments, a subsidiary of AMETEK, Inc. is one of the most innovative companies world wide manufacturing automatic petroleum testing equipment. Grabner Instruments’ success is based on the development of highly innovative, fully automated, portable fast & easy to operate fuel and oil analyzers.

MINIVAP VP Vision – Vapour Pressure Analyzer


Highly versatile that features best-in-class precision and a pressure range of 0-2000 kpa

 

MINISCAN IR Vision –  Portable Multi Fuel Analysis


FTIR fuel analyzer for  automatic measurement of gasoline, jet and diesel fuels.

 

MINIFLASH FP Vision – Flash Point Analyzer


Flash point as per ASTM D6450 and ASTM D7094 Continuously closed cup – Sample volume of 1-2 ml.

 

MINIDIS ADXpert – Mini-Distillation Analyzer


Distillation run takes just 15 minutes and requires as little as 6 mL of sample.

 

MINITEST FFK Grease Tester


Flow-Properties of Lubrication Grease according to Kesternich (DIN 51805)

AD Systems specializes in the design, manufacturing of  unique test equipment for the evaluation of physical properties and performances of fuels and lubricants. All of the products offered by AD Systems were developed in response to specific needs within the petroleum industry.

TO10 – Thermal Oxidation Stability Test Rig


ASTM D3241, ASTM D1655, ASTM D7566 , IP 323 , DEFSTAN 91-091 , ISO 6249

 

DR10 – ITR Tube Deposit Rater


ASTM D3241, ASTM D1655, ASTM D7566, ISO 6249, Def Stan 91-91

SP20 – Automatic Smoke Point Tester


Referee Instrument. ASTM D1322, D1655, IP 598, Def Stan 91-91

 
Corrosion bath

CB10 – Automated Corrosion Bath 


Corrosion Properties of Mineral Oil & Pipeline Cargoes ASTM D665, NACE TM0172

 
 

CT10 – Corrosion Tester


NACE TM0172, ASTM D665, D7548, IP 135, ISO 7120, JIS K2510

 

AutoREID – Reid Vapor Pressure Analyzer


ASTM D323, D4953, ISO 3007, IP 69.

 
 

DT100DL – Dispersancy Tester


Measurement of the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method , ASTM D7899

 

SV10 – Asphaltene Stability


ASTM D7157, ISO PAS 23263, CIMAC guidelines

Phase Technology has an outstanding reputation as a leader in the cold flow properties testing industry due to the consistent introduction of new innovative products and continual improvement in the quality, design and capabilities of its offerings.

MFA: Marine Fuel Viscosity, Density & Cold Properties


Stay compliant with IMO 2020 regulations

DFA-70Xi: Diesel Cloud, Pour, Viscosity & Density


Four diesel fuel tests in one single unit, in less than 25 minutes

JFA-70Xi: Freeze, Viscosity & Density


Measure freeze point, viscosity and density in jet fuel with Phases’s JFA-70Xi in less than 15 minutes

70Xi: Cloud, Pour & Freeze Point


Phase Technology’s 70Xi analyzes pour, cloud and freeze point, all in one unit

WAT-70Xi: Wax Appearance Temperature


Measure Wax Appearance Test (WAT) and Wax Disappearance Test (WDT) with the WAT-70Xi

TSHR BV is an innovative, young and dynamic company for the development, manufacturing, sales, service and distribution of Combustion Elemental Analysis solutions.

 

 

NEXIS VP TN/ TS – Total Sulfur / Nitrogen Analyzer


Vertical sample introduction and high temperature oxidation followed by UV-Fluorescence (TS-UVF) and chemiluminescence (TN-CLD) detection

 

NEXIS TN/ TS / TX – Total Sulfur / Chlorine / Nitrogen Analyzer


Horizontal sample introduction and high temperature oxidation followed by UV-Fluorescence (TS-UVF) and chemiluminescence (TN-CLD) detection

 

NEXIS GM – Gas and LPG Auto Sampler


Introduce safe, accurate and reliable your Gas and LPG samples – ASTM D3246, ASTM D6667, ASTM D7551

 

AS 120 Autosampler


Liquid & Solid Autosampler. Accepts 10uL – 250 uL syringe volume.

 

NEXIS AI Liquid Auto Injector Module


Semi Automatic introduction of Liquids into NEXIS VP Analyzers.

Omnitek B.V. has been on the market for 40 years and is known worldwide for its automatic kinematic viscometry systems covering a wide range of viscosity testing.

U-Visc kinematic viscometer


Full range automatic viscometry systems for lubricants and other petroleum products. ASTM D445, D446, D2270

S-flow IV⁺ Kinematic Viscometer


Houillon viscosity reinvented with an optional autosampler , ASTM D7279, D2270

BitUVisc kinematic viscometer


Fully automatic viscometer for highly viscous samples up to 120,000 mm²/s. ASTM D445/D446, ASTM D2170

AlyTech is a France-based company founded in 1999 and headquartered in Paris region.

It is a strong team of chemists, electronic and software engineers with long experience in gas systems, chromatography and elementary analysis. Alytech develops, manufacture and sell automated gas preparation systems under GasMix™ brand since 2007

GasMix™ AIOLOS II


Dynamic gas mixer to perform multi-point calibration, linearity checks, LOQ/LOD validation.
Complies to ISO 6145-7

ZEPHYR – Compact diluter with a smart software


Simple in operation and widely used for various applications that involve only 2 gases.
Complies to ISO 6145-7

NOMAD – New portable gas mixer, diluter


Compact and intelligent instrument that assists in routine quality procedures in a lab, in a mobile lab or at a customer site. Complies to ISO 6145-7

HURRICANE – Versatile tool to make really complex gas mixtures


Diluting – Blending up to 16 gases simultaneously! Complies to ISO 6145-7

 
 

GMRACK – Up to 6 gas channels


Enhanced functionalities of GasMix™… in a 19″ rack. Complies to ISO 6145-7

 
       

ATMO – Dedicated to the air monitoring agencies


Calibrate 3 analyzers in a r row automatically.

 
 
gas vapouriser

AURA II – LPG VAPORIZER


Standalone vaporizer for safe and repeatable vaporization of liquefied petroleum gas (LPG) or other liquefied gas for sampling to GC, microGC, GC/MS or elemental Analyzer.

 

LIQMIX – Generate your gas standard from a liquid


The system vaporizes a liquid into a gas stream generating a gas standard at multiple concentrations . Complies to ISO 6145-7

 
 

LIQMIX CASCADE – Generate gas standard from liquid down to ppb levels


Multi-stage cascade dilution offers very wide range of concentrations from % to ppb levels. Complies to ISO 6145-7

 

PerMix ATMO – Portable Calibration Gas Generator


Unique all-in-one calibration solution for laboratory, mobile labs or remote locations useM

Emcee Electronics Inc was founded in New Castle, Delaware in 1958. In 1959 Emcee developed an initial instrument, the Water Separometer, which has evolved into the current Micro-Separometer.
Emcee has since developed other instruments used to test for certain qualities in fuels, lubricants, solvents, paints, coatings, additives, and other fluids.

 
 

Model 1152 Digital Conductivity MeterWater Separation Characteristic, Free Water And Particulate Testing (ASTM Standard Test Methods D3948, D7224, D7261 & D4860)

Model 1152 Digital Conductivity Meter


ASTM Standard Test Method D 2624 included in Specifications D975, D1655, and D7566

ORBIS BV based in Netherlands,  designs and manufacture instruments for physical properties testing. For tests that are typically carried out in the energy industry, according to ASTM and related methods.

STARDist – Automatic Atmospheric Distillation


Excellent performance in Automatic Distillation testing. ASTM D1078, ASTM D850, ASTM D86 , IP 195, ISO 3405

AirSTAR Cold Filter Plugging Point Analyzer


ASTM D6371, EN116, IP309, JIS K2288, EN16329

Choice Analytical, Inc. is a leading-edge analytical instrumentation company focused on cutting edge technology ,with state-of-the-art manufacturers supplying the most innovative instrumentation for developing unique products for automated color and haze testing.

 

Automatic Color, Haze and Clarity measurement


ASTM D8148 Haze in Fuels. Color tests performed ASTM D1500, Saybolt D156, D6045, D1209, D5386, ISO 2049, IP 196.

QuantaRed Technologies founded in 2008 is a leading global provider for QCL – Quantum Cascade Laser Technology

FAMESPEC – FAME in Jet Fuel Analyzer


Compact stand ‐ alone analyzer that comes in a modern, portable and rugged design. Complies with ASTM D8290

ECOSPEC – Oil In Water Analyzer


Quantify Oil in Water in down to 0.1 mg/L using eco-friendly, CFC-free solvents in compliance  with ASTM D7678.

J.M. Canty based in USA ,  manufactures lighting, cameras, sight flow indicators, quick opening closures, glass to metal seals, vision-based process control, and particles sizing systems.

 

LUBE OIL PARTICLE & WATER ANALYZER


Particle Sizing. Particle Count , Water in Oil 

Since 1992, Zeltex has offered the premier line of portable NIR analyzers for fuel, grain and food. Headquartered in Hagerstown, Maryland, Zeltex has supplied thousands of Customers with the tools needed to succeed in today’s competitive markets.

 

Portable Near Infrared Octane/Cetane Analyzer


Highly accurate and reliable near – infrared spectroscopy for analysis of Octane and Cetane levels in gasoline , ethanol blended gasoline and diesel fuels

B/R Instrument has specialized in laboratory distillation equipment since 1966. Common uses of its distillation systems include solvent recycling, solvent purification, crude oil distillation, and many other applications of high efficiency fractional distillation.

Automatic Crude Oil Distillation


The Automaxx 9100 performs ASTM D2892 D5236 crude oil distillation automatically.

Vacuum Distillation


Performs the ASTM D1160 vacuum distillation automatically.