Diffractometers

4-Circle Diffractometer 5042

4-circle

The Huber diffractometer type 5042 is a stable 4-circle diffractometer that can be used both for X-ray as well as for neutron applications.Depending on its use, the system is equipped with different components:

Tube hood and monochromator 151 for X-ray applications, and plane detector for neutron applications.

4-Circle Diffractometer 5020

4-circle 5020

The Huber diffractometer type 5020 is a 4-circle diffractometer that can be used both vertically and horizontally.The system mainly consists of the components 440, 430 and 512.A 2-Circle Goniometer 414, mounted on the 2-Theta arm, serves as an analyzer.Occurring forces are compensated by corresponding counter weights.

6-Circle Diffractometer

6-circle-424

This 4-circle diffractometer, consisting of the components 424 and 512.51, offers a wide variety of possible applications ranging from residual stress and textural measurements to thin film analysis and wafer investigations.

Integrated in the Phi-circle is an XYZ-adjustment (150mm x 150mm x 25mm). The power supply is via jumper rings.

6-Circle Diffractometer 5021

6-circle-5021

The Huber diffractometer type 5021 is a 6+2-circle diffractometer for synchrotron radiation.The system mainly consists of the components 480, 2×440, 430 and 512.1.A 2-Circle Goniometer 415, mounted on the 2-Theta arm, serves as an analyzer.Occurring forces are compensated by corresponding counter weights.

Kappa Goniometers series 515

Kappa

The Kappa goniometers of the series 515 basically consist of two rotational stages assembled together in a 60° Kappa geometry.A further circle rotates the Kappa unit around a horizontal axis. An XYZ-stage driven by micromotors is incorporated for the fine adjustment of the sample.Similar to the Euler cradle 512, motor and signal currents are transmitted via slip rings. This enables unrestricted Kappa and Phi rotation.Depending on load (F max) and size requirements (D), various system sizes are available.