|
|
|
|
|
|
|
|
|
|
PMA-4 PENSKY MARTENS FLASH POINT TESTER CATALOGUE |
| » | | ASTM D93 A&B, IP34-A&B, ISO2719-A&B, JIS K2265Looking for D-6450 or D-7094? |
| » | | ASTM D93A for fuel oils, lubricating oils and other homogeneous liquids. | |
| » | | ASTM D93B for non-homogeneous materials (mixtures of liquids & solids) | |
| » | | Temperature range of +40 ºC to +360 ºC | |
| » | | Two user defined test programs | |
| » | | Fire extinguisher and 12-Place sample changer available | |
| » | | Applications: Bitumen, Engine oil, hydraulic fluid, Jet Fuel, Lube oil, Power Plants. | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ABA-4 ABEL FLASHPOINT TESTERCATALOGUE |
| » | | IP 170, IP491, IP492, ISO1516, ISO1523, ISO13736 and more |
| » | | Determination of the closed cup Flashpoint of petroleum products and other liquids having Flash points between (-)30 ºC to +110 ºC | |
| » | | Peltier cooling integrated * Electric and gas ignition | |
| » | | Barometric Pressure correction | |
| » | | Applications: Biodiesel, Bitumen, Engine oil, Fuel, Jet Fuel, Lube oil, Mastics,
Paints, Power Plants, Solvents, Turbine Fuel, Turbine oil, Varnish | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CLA-5 CLEVELAND OPEN CUP FLASH POINT TESTERCATALOGUE |
| » | | ASTM D92, ISO 2592, IP36, JIS K2265 and more | |
| » | | Temperature range: +79 to 400°C | |
| » | | Built –in sensor for automatic barometric pressure correction. | |
| » | | Overheating detection with automatic heat shut-off during the test. | |
| » | | Calibration protocol print out | |
| » | | Message when result is out of specification | |
| » | | Password protection access for service & configuration level | |
| » | | Easy firmware update and data handling via USB stick . | |
| » | | Applications: Bitumen, Engine oil, Hydraulic Fluid, Jet Fuel, Lube Oil, Power Plants. | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ADU-4+ AUTOMATIC DISTILLATION ANALYZERCATALOGUE |
| » | | ASTM D86, ASTMD850, 1078, IP 195, 123, ISO3405, JIS K2254Looking for D7344? |
| » | | Integrated cooling system & in-built computer (with Windows & ADU Pro software) with external flat screen monitor. | |
| » | | Automatic Volume Detection | |
| » | | In built fire-Extinguisher(For Co2 or N2). | |
| » | | Wide temperature range 0 to 450°C. | |
| » | | Distillation group 1-4 groups (0 & Solvents with additional accessories). | |
| » | | Dry point detection (with additional accessories). | |
| » | | Applications: Gasoline, Aviation Gasoline, Aviation turbine fuels, white spirits, Kerosene, distillate fuel oils, gas oils, solvents. | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PetroOXY OXIDATION STABILITY TESTERCATALOGUE |
| » | | ASTM D7525 (Gasoline) & ASTM D7545 (Diesel, Biodiesel, FAME) | |
| » | | Temperature range up to +200 ºC | |
| » | | Uses small sample volume of 5ml | |
| » | | Short test time, normally less than 1 hour | |
| » | | Automatic Pressure detection system; Barometric Pressure correction | |
| » | | Automatic Oxygen Charging & relief, Heating & Re-Cooling | |
| » | | Applications: Biodiesel, Diesel, Gasoline, Lubricating Grease, Lube oil, Hydraulic oil, insulating oil | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TEMPERING BATH FOR VISCOSITYCATALOGUE |
| » | | ASTM 445, ASTM D 446, ASTM D2170, (DIN51 561, DIN 51),EN 12 595, FTM 791-305, IP 71-1+2, IP 319, ISO 3104, ISO 3105, JIS K2207, JIS K2283 | |
| » | | Suitable for all petroleum products both transparent and bitumen | |
| » | | 7-place bath - temperature up to +150 ºC max | |
| » | | Suitable for Ubbelohde, Cannon-Fenske or BS/IP-U-tube viscometers | |
| » | | Applications: engine oil, jet fuel, gasoline, gear oil, insulating oil, power plant | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OBA OXIDATION STABILITY TESTERCATALOGUE |
| » | | ASTM D 525, D873, IP40, IP138, FTM 791b.3352; ISO 7536 | |
| » | | Four place Liquid Bath or Dry Heat Bath | |
| » | | Two or Four oxidation vessels | |
| » | | Two or Four intelligent manometers | |
| » | | All parts in contact with sample are of Stainless Steel | |
| » | | Application: Fuel, Gas Oil, Gasoline, Jet Fuel, Turbine Fuel | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| COPPER CORROSION TESTERCATALOGUE |
| » | | ASTM D-130, D-4048, ISO-2160, DIN 51759-1, DIN-51811,FTM-791-5325, IP-112, IP-154, JIS K-2220, BS-4351 | |
| » | | Detection of the corrosiveness to copper of aviation gasoline, aviation turbine fuel,automotive gasoline, natural gasoline or other hydrocarbons. | |
| » | | Temperature upto 200 ºC | |
| » | | 6-place bath; 4 pressure vessels | |
| » | | Also available: Silver Corrosion tester | |
| » | | Application: Aviation gasoline, aviation turbine fuel, automotive gasoline | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HERSHEL EMULSIFIERCATALOGUE |
| » | | ASTM D 1401 - ISO 6614 - FTM 791-380 | |
| » | | 7 Place full view bath with Luminous background | |
| » | | Variable Stirrer speed with digital display | |
| » | | Automatic timer stop and audible alarm | |
| » | | Thermostat with digital setting | |
| » | | Luminous background | |
| » | | Overtemperature Protection | |
| » | | Application: Crude Oil, Engine Oil, Gas Oil, Gear Oil, Hydraulic Oil, Insulating Oil | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| GUM CONTENT TESTERCATALOGUE |
| » | | ASTM D 381; IP 131; IP 540; ISO 6246; EN 26 246; DIN 51 784 | |
| » | | 5 Jets Air-and Steam-Method | |
| » | | Multiple-Steam-Delivery-Test-Head for all 5 pre-adjusted inlet-tubes | |
| » | | Stainless steel Housing with strong temperature insulation | |
| » | | Manual air supply control valve, Manometer for both air and steam-method. | |
| » | | Digital Electronic heating block control, | |
| » | | Liquid thermostat for steam superheater, over temperature protection. | |
| » | | Application: Aviation Fuel, Gas Oil, Gasoline, Turbine Fuel | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PetroCEN CENTRIGFUGECATALOGUE |
| » | | ISO 3734; ISO 9030; D4007; D2709; D1796; D2711; D91; D893 | |
| » | | Rotor ASTM D 96; IP 75; IP 359; API 2542; API 2548; DIN 51 793 |
| » | | Temp. +70ºC +/-1ºC | |
| » | | Pre-selectable speed, working time and break rate with digital indication | |
| » | | Speed: 100 to13500 rpm; Timer: 0-60 min | |
| » | | Vibration detector and cut-off; Safety cover | |
| » | | Application: Crude Oil, Fuel Oil | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SALINOMETERCATALOGUE |
| » | | ASTM D 3230, IP 265, JIS K2601 |
| » | | Salts in Crude Oil by Electrometric Method | |
| » | | Determination of the ap-proximate chloride (salts) concentration in crude oil Range of concentration: 0 to 500 mg/kg or 0 to 150 lbs/1000 bbl as chloride | |
| » | | concentration/volume of crude oil. | |
| » | | Also available: Portable model | |
| » | | Applications: Crude Oil, Fuel Oil | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| BPA-5 AUTOMATIC BREAKING POINT TESTERCATALOGUE |
| » | | EN 12593 IP 80 JIS K2207 | |
| » | | automatic breaking point tester according to FRASS method | |
| » | | Measuring range from-36 ºC to 60 ºC | |
| » | | Peltier cooler integrated | |
| » | | PC software available | |
| » | | Easy handling | |
| » | | Applications: homogenous road or industrial bitumen | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PNR 12 PENETROMETERCATALOGUE |
| » | | ASTM D1321, ASTM D937, IP 310, 50, ISO 2137, 6873 | |
| » | | Suitable for needle, cone, rod penetration for different applications | |
| » | | 16 user programs possible | |
| » | | Automatic surface Detection on bitumen samples | |
| » | | Movement by stepper motor | |
| » | | Jog-shuttle driven menu | |
| » | | Applications: solid, semi-solid bituminous mixtures | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RKA-5 AUTOMATIC SOFTENING POINT TESTERCATALOGUE |
| » | | ASTM D 36; ASTM E 28; IP 58; ISO 4625-1 | |
| » | | Dual OMAP controller technology | |
| » | | 4.7" full graphical colour display | |
| » | | Automatic self check of sensors and system | |
| » | | Infrared radiator technology with temperature control | |
| » | | Software controlled stirrer system | |
| » | | Transparent draught deflector, Two Test places | |
| » | | Applications: Bitumen, marine, paint, road research | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DDA3 AUTOMATIC DUCTILITY APPARATUSCATALOGUE |
| » | | ASTM D 113 - ASTM D 6084 - ASTM D 5092 EN 13 398 | |
| » | | Ductility/Elongation; Force Ductility; Elastic Recovery; Deformation Energy | |
| » | | Microprocessor control, membrane keypad; PC output, RS-232 printer | |
| » | | Working Range: approx. -10 to +60 °C | |
| » | | Variable traction speed: 2.5...140 mm/min (Standard 50 mm/min) | |
| » | | Maximum Tension Force 300 N/Test Position | |
| » | | Application: Asphalt, Bitumen, Polymers, Road Research | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RCRT-1 CARBON RESIDUE BY RAMSBOTTOMCATALOGUE |
| » | | ASTM D 524, ISO 4262, FTM 791-5002, IP 14, NF T60-117 | |
| » | | Coking Furnace with 5 bulb wells | |
| » | | Indicating and Control Unit with heating control, | |
| » | | Digital display of true temperature | |
| » | | Temp. range of 0 ... 760 : 1 °C. | |
| » | | Applications: Diesel, Engine Oil, Lube Oil, Petroleum, Turbine Fuel | |
| | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| GREASE WORKING MACHINECATALOGUE |
| » | | ASTM D 217, ISO 2137, FTM 791-0313, IP 50, JIS K2220 | |
| » | | Electrically operated | |
| » | | Two place model | |
| » | | 2 x 51 hole worker plates according to ASTM D217 | |
| » | | Optional 270 hole worker plate according to FTM 791-313 | |
| » | | Applications: Automotive, Ball & Roller Bearings, Grease, Motor Vehicles,Pharmaceuticals, Power Generation | |
| | | |
|
|
|
|
|
|
|
|
|
|