Smoke Point Tester

sp10

The Smoke Point method, in accordance with ASTM D1322, IP 598, is one of the oldest test methods in the petroleum industry. This test method provides an indication of the relative smoke producing properties of kerosenes and aviation turbine fuels in a diffusion flame. The smoke point is related to the hydrocarbon composition of such fuels.

The SP10 Revolutionizes Smoke Point Testing
This unique automated instrument uses a patented system (License TOTAL RM) based on a video camera that measures the flame. The flame image is digitalized. The dedicated software determines the height of the flame when its shape corresponds to the one described in the test method. This specific flame is the one with the maximum height without smoke generation. The SP10 performs three determinations of the flame heights and reports the average value in strict accordance with the test method. The results are saved in an internal database and can be printed, transferred to a USB memory stick and/or sent to a LIMS. Every test is fully documented and traceable, which is imperative for aviation industry quality procedures.

The SP10 is an Automatic Smoke Point instrument that strictly follows the test method while both eliminating the subjectivity inherent to the manual test and significantly improving repeatability and reproducibility. Additionally, the SP10 eliminates all safety risks linked to the visual observation of an open flame. The test can now be run unattended which drastically reduces labor costs.

  • Methods
  • Benefits
  • Applications
  • Specifications
Aviation Turbine Fuel – Standard Specification ASTM D1655 and Def Stan 91-91
  • Quick, easy, and objective rating
  • Increases safety
  • Reduces labor, minimum 30 minutes saved per test
  • Mimics strictly the manual method with iImproved precision
  • Very compact design
  • Quality Procedure features

The SP10 is a versatile instrument for routine applications at locations where quality of kerosenes and aviation turbine fuel is evaluated in accordance with test methods ASTM D1322, IP 598. The SP10 can be used at the following locations and more:

  • Refineries
  • Military
  • Research and Development
  • Independent Laboratories
  • Aircraft Engine Manufacturers
  • Pipeline and Terminals
Test duration Less than 10 minutes
Resolution (flame height) 0.1 mm
Repeatability and Reproducibility r=0.6 and R=0.9 Four times better than manual test method (r=2.8 and R=3.8)
Parameters saved with a test result Smoke point in 0.1 mm (according to selected test method), Sample type, Sample ID, Date and Time, Barometric pressure, Operator name, Test method, Calibration information, Instrument serial number, Software version
Results storage Up to 100 000 results